An Introduction To The Bosch GLR225 Laser Measuring Device

Measuring rooms or entire homes with tape measures is quite time-consuming and a great deal of work. The Bosch GLR225 laser measuring device helps get work done more precisely and quickly. The GLR225 measures at the speed of light up to a distance of 225 feet. It has an accuracy of plus or minus one-sixteenth of an inch. It is a handy productivity tool for jobs that require the calculation of distances, areas or volumes, indoors.

As with all Bosch laser distance meters, the Bosch GLR225 has a full function keyboard with a button assigned for each major function. This makes it easy to operate the device single-handedly.

Laser Tape Measure

In addition, it has memory for storing measurements, the ability to change dimensions between feet, inches and metric, and the function of doing measurements from four points of reference. The GLR225 can also perform additional calculations such as Pythagoras which is used for doing indirect measurements. Other measurement modes include the multi-surface area and the minimum maximum function.

The minimum reading is used to scan a distant wall and find the shortest line. The maximum reading is used to find the exact distance in a corner or for doing diagonal measurements.

To begin a measuring session, switch it on press the On/Off button. Then, select the reference level. For length measurement simply push the Length Measurement button until the Length Measurement indicator appears in the display. Push the measuring button once for target sighting and once more to take the actual measurement. The measured value is clearly indicated at the bottom in the display.

As mentioned, it is possible to select from four different reference levels by pressing the Reference Position button. Measurements can be made, from front edge, from tripod thread, from rear end or from stop pin.

Measuring from the front edge is appropriate when measuring onward from a horizontal surface, such as a table edge. Measurements from a tripod are suitable when extra measurement stability is required. A measurement from rear edge occurs when positioning the laser measuring device against a vertical surface, such as a wall. With the integrated stop pin it is possible to measure in spots that are difficult to reach.

When searching for customer reviews online, almost all were found to be 4-star and 5-star reviews. Users of the Bosch GLR225 laser measuring device like the fact that it can measure in multiple modes and units. Many state that it is very simple to use and that some did not have to read the manual before they started doing measurements and even using its more advanced features.

One criticism about this device is its soft, mushy keyboard which might deteriorate fast. But this was a hypothesis as no one reported a keyboard that has worn out. Another negative point about the GLR225 is that its liquid crystal display (LCD) does not have back light making it difficult if not impossible to use in the dark. Overall, the GLR225 packs a lot of advanced features normally present in laser distance meters that cost hundreds of dollars. The GLR225 laser distance meter only costs 4.99 at Amazon as of the time of writing.

An Introduction To The Bosch GLR225 Laser Measuring Device

Add To Facebook Add To Twitter Add To Yahoo Add To Del.icio.us Stumble This Fav This With Technorati Digg This Add To Reddit